Missing Graph data

General Talk

Moderators: OutBack Moderator Team, OutBack

Post Reply
User avatar
kiwisolar
Forum Expert
Posts: 74
Joined: Wed Jun 30, 2021 10:59 pm
My RE system: VFXR3048E
FM80-150VDC
Flexnet DC
Hoppecke Sun Power VR-M 6V 250AH batteries (16 total, 48V).
Gentech EP8000HSRE-RS Generator with Honda 390GX engine.

Missing Graph data

Post by kiwisolar » Thu Jul 17, 2025 4:28 pm

Anyone else missing graph data today, in OpticsRE? It's 11:30am here, and the last bar on my graph is 0800am.
The Power flow and batter status all look to be up to date.
Attachments
mising graph.jpg

User avatar
kiwisolar
Forum Expert
Posts: 74
Joined: Wed Jun 30, 2021 10:59 pm
My RE system: VFXR3048E
FM80-150VDC
Flexnet DC
Hoppecke Sun Power VR-M 6V 250AH batteries (16 total, 48V).
Gentech EP8000HSRE-RS Generator with Honda 390GX engine.

Re: Missing Graph data

Post by kiwisolar » Thu Jul 17, 2025 4:53 pm

Edit: The 9am bar just showed up, but missing the generators input (pink lines normally). Odd.

raysun
Forum Overlord
Posts: 13666
Joined: Tue Jul 26, 2016 5:57 am
My RE system: (Former system. Now retired.)
Flexpower Two: (2) FXR3048A-01 - Series Stacked, (2) FM80, MATE3s, FlexNetDC
6 SimpliPhi 3.8-48 (48v @ 75AH. 450AH total)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
2 Midnite Solar MNPV6 combiners w/20A DC disconnects.
Honda EU7000is gas fuel generator
Off-Grid

Re: Missing Graph data

Post by raysun » Thu Jul 17, 2025 4:55 pm

kiwisolar wrote: ↑
Thu Jul 17, 2025 4:28 pm
Anyone else missing graph data today, in OpticsRE? It's 11:30am here, and the last bar on my graph is 0800am.
The Power flow and batter status all look to be up to date.
When was the generator started?

User avatar
kiwisolar
Forum Expert
Posts: 74
Joined: Wed Jun 30, 2021 10:59 pm
My RE system: VFXR3048E
FM80-150VDC
Flexnet DC
Hoppecke Sun Power VR-M 6V 250AH batteries (16 total, 48V).
Gentech EP8000HSRE-RS Generator with Honda 390GX engine.

Re: Missing Graph data

Post by kiwisolar » Thu Jul 17, 2025 5:10 pm

Generator started at 0800.
The system time is reading correctly in OpticsRE.

So I'm missing generator input (from 0800),
Solar input (from 10am)
To/from battery (from 10am).

Actually I've just seen the 0900 "to battery" bar rise as if it were the current time bar, so something is off. And the "to battery" bar is currently showing 1.6kw, much bigger than the solar bar (showing 0.2kw), which isn't right either.

User avatar
mexsudo
Forum Guru
Posts: 308
Joined: Wed Mar 13, 2019 7:40 pm
My RE system: 8 290 watt panels: Canadian Solar CS3K-290P
8 AGM 12v 115Ah batteries: Duravolt DGG115-2 (48 volt)
Inverter: Outback VFXR3648A, 3600VA
Charge Controller: Outback FLEXmax 60, FM60-150VDC
System Display and Controller: Outback MATE3s
===
4 370watt panels Axitec AXIPREMIUM
APSystems QS1A 1500W micro inverter
APSystems ECU-R
Location: Ensenada, Baja California, Mexico

Re: Missing Graph data

Post by mexsudo » Mon Jul 21, 2025 7:01 am

my graph was 5 hours off on Friday evening, now my graph is blank.
this Forum (and the rest of outback) was off line too.
Peter in Baja

Sparkey
Forum Guru
Posts: 163
Joined: Tue Jan 28, 2020 8:14 pm
My RE system: 7.2KW of 300w SolarWorld US panels in 2x 4 strings of 3..
Midnight Solar combiner box with 8x 15a solar breakers..
2x FlexMax 80 charge controllers and wiring for a 1.2% total system loss from solar panels to batteries..
1 Mate3s, 1 Hub4, 1 Flexnet DC
Outback Radian 8048a and Radian 4048a inverters..
2x 17 cell LiFePo4 battery banks of 300a EVE A cells with JK BMS..
2x 200a fuses and 2x 175a breaker/disconnects in a GSLC-175-PV-120/240..
1 bank of L-16 batteries and 150a fuse..
1 Duro Max 1200w120/240v generator and 1 Briggs 4kw 120/240v generator..
Location: Northeast Ohio

Re: Missing Graph data

Post by Sparkey » Mon Jul 21, 2025 7:17 am

done and done
Last edited by Sparkey on Sat Jul 26, 2025 3:25 pm, edited 1 time in total.
Ohio rural country living with solar

User avatar
bluespur
Forum Guru
Posts: 158
Joined: Wed Feb 23, 2011 2:32 pm
My RE system: VFX3024x2
Flexmax60x2
3000W total solar, 135w panel array and 220w panel array
Mate3
12xHawker Perfect Plus 8PZS120 FLA batteries
Own built generator Kubota D600 engine, 7.5Kw gen head
Location: Arahura Valley, New Zealand

Re: Missing Graph data

Post by bluespur » Mon Jul 21, 2025 3:28 pm

Were I a theorist I could speculate that the OB we stuff has all been moved to a platform that has a much lower service level, this forum is now much slower too after the outage yesterday

User avatar
mexsudo
Forum Guru
Posts: 308
Joined: Wed Mar 13, 2019 7:40 pm
My RE system: 8 290 watt panels: Canadian Solar CS3K-290P
8 AGM 12v 115Ah batteries: Duravolt DGG115-2 (48 volt)
Inverter: Outback VFXR3648A, 3600VA
Charge Controller: Outback FLEXmax 60, FM60-150VDC
System Display and Controller: Outback MATE3s
===
4 370watt panels Axitec AXIPREMIUM
APSystems QS1A 1500W micro inverter
APSystems ECU-R
Location: Ensenada, Baja California, Mexico

Re: Missing Graph data

Post by mexsudo » Mon Jul 21, 2025 4:24 pm

Good theory.
I keep getting various bad gateway errors.

Hopefully OB will become robust again.
Peter in Baja

User avatar
bluespur
Forum Guru
Posts: 158
Joined: Wed Feb 23, 2011 2:32 pm
My RE system: VFX3024x2
Flexmax60x2
3000W total solar, 135w panel array and 220w panel array
Mate3
12xHawker Perfect Plus 8PZS120 FLA batteries
Own built generator Kubota D600 engine, 7.5Kw gen head
Location: Arahura Valley, New Zealand

Re: Missing Graph data

Post by bluespur » Mon Jul 21, 2025 4:30 pm

or maybe it is becoming enshittified :eek:

SumPowerRays
Forum Guru
Posts: 201
Joined: Tue Oct 11, 2022 7:48 pm
My RE system: Off Grid
(1) Flexpower Radian 8048A
MATE3s, HUB 10.3, FN-DC, RTS,
(2) FLEXmax 100 AFCI charge controllers
(12) Northstar Blue 190FT batteries 606 AH
(24) REC 365NP2 Panels.
(4) Arrays of 2190 watts each.
Location: Central Washington State

Re: Missing Graph data

Post by SumPowerRays » Tue Jul 22, 2025 6:50 am

bluespur wrote: ↑
Mon Jul 21, 2025 4:30 pm
or maybe it is becoming enshittified :eek:
Just got back from the outhouse and now reading this!

The solar DIY market has shifted to cheaper AIO and Hybrids made in China by servants of the state. Outback will have a hard time competing with the now very established Chinese production that has matured into viable products for this market.

It appears that the only long term major LF inverter player for marine or off grid still standing is Victron. I have gone that direction. Easy setup and just like Outback installs it just works out of the box.

I do hope that the folks at Commerce Texas and Sulpher Springs Texas that are now in charge can make a comeback to excellence!

Sparkey
Forum Guru
Posts: 163
Joined: Tue Jan 28, 2020 8:14 pm
My RE system: 7.2KW of 300w SolarWorld US panels in 2x 4 strings of 3..
Midnight Solar combiner box with 8x 15a solar breakers..
2x FlexMax 80 charge controllers and wiring for a 1.2% total system loss from solar panels to batteries..
1 Mate3s, 1 Hub4, 1 Flexnet DC
Outback Radian 8048a and Radian 4048a inverters..
2x 17 cell LiFePo4 battery banks of 300a EVE A cells with JK BMS..
2x 200a fuses and 2x 175a breaker/disconnects in a GSLC-175-PV-120/240..
1 bank of L-16 batteries and 150a fuse..
1 Duro Max 1200w120/240v generator and 1 Briggs 4kw 120/240v generator..
Location: Northeast Ohio

Re: Missing Graph data

Post by Sparkey » Tue Jul 22, 2025 9:23 am

done and done
Last edited by Sparkey on Sat Jul 26, 2025 3:25 pm, edited 1 time in total.
Ohio rural country living with solar

User avatar
mexsudo
Forum Guru
Posts: 308
Joined: Wed Mar 13, 2019 7:40 pm
My RE system: 8 290 watt panels: Canadian Solar CS3K-290P
8 AGM 12v 115Ah batteries: Duravolt DGG115-2 (48 volt)
Inverter: Outback VFXR3648A, 3600VA
Charge Controller: Outback FLEXmax 60, FM60-150VDC
System Display and Controller: Outback MATE3s
===
4 370watt panels Axitec AXIPREMIUM
APSystems QS1A 1500W micro inverter
APSystems ECU-R
Location: Ensenada, Baja California, Mexico

Re: Missing Graph data

Post by mexsudo » Tue Jul 22, 2025 9:36 am

SumPowerRays wrote: ↑
Tue Jul 22, 2025 6:50 am
bluespur wrote: ↑
Mon Jul 21, 2025 4:30 pm
or maybe it is becoming enshittified :eek:
Just got back from the outhouse and now reading this!

The solar DIY market has shifted to cheaper AIO and Hybrids made in China by servants of the state. Outback will have a hard time competing with the now very established Chinese production that has matured into viable products for this market.

It appears that the only long term major LF inverter player for marine or off grid still standing is Victron. I have gone that direction. Easy setup and just like Outback installs it just works out of the box.

I do hope that the folks at Commerce Texas and Sulpher Springs Texas that are now in charge can make a comeback to excellence!
I don't give a rat's pajamas about the political and cultural climate of the nation of the manufacturer.

Quality, Features, Price are what I look for (and that would include Support)

Hopefully OB will be able to adapt to New sources of components and repackage as necessary, maintaining their established Brand Recognition... and support us with big investments in the now Legacy hardware

PS: my last new vehicle purchase was last year. Chinese. Very pleased, good feature set, industrial quality, and about a third the price of the North American and European offerings.
Peter in Baja

User avatar
Fractionate
Forum Virtuoso
Posts: 77
Joined: Tue Jul 12, 2022 10:56 am
My RE system: FlexMax (5)
Mate 3s (2)
FlexNetDC (2)
GS8048A/GS4048A
LiFePO4 batteries (80kWh)
20 kW of panels in five sub-arrays
12kW Kohler backup genset
Off-grid

Re: Missing Graph data

Post by Fractionate » Tue Jul 22, 2025 11:47 am

Can somebody post a Telegram invite link to the Outback Power channel? This recent outage is forcing me to find alternate means to communicate.

I found the old link, but it's expired.

raysun
Forum Overlord
Posts: 13666
Joined: Tue Jul 26, 2016 5:57 am
My RE system: (Former system. Now retired.)
Flexpower Two: (2) FXR3048A-01 - Series Stacked, (2) FM80, MATE3s, FlexNetDC
6 SimpliPhi 3.8-48 (48v @ 75AH. 450AH total)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
2 Midnite Solar MNPV6 combiners w/20A DC disconnects.
Honda EU7000is gas fuel generator
Off-Grid

Re: Missing Graph data

Post by raysun » Tue Jul 22, 2025 11:55 am

The Telegram channel disappeared, so I created a new one:
https://t.me/+pm3GzPdo721mMjFh

User avatar
mexsudo
Forum Guru
Posts: 308
Joined: Wed Mar 13, 2019 7:40 pm
My RE system: 8 290 watt panels: Canadian Solar CS3K-290P
8 AGM 12v 115Ah batteries: Duravolt DGG115-2 (48 volt)
Inverter: Outback VFXR3648A, 3600VA
Charge Controller: Outback FLEXmax 60, FM60-150VDC
System Display and Controller: Outback MATE3s
===
4 370watt panels Axitec AXIPREMIUM
APSystems QS1A 1500W micro inverter
APSystems ECU-R
Location: Ensenada, Baja California, Mexico

Re: Missing Graph data

Post by mexsudo » Wed Jul 23, 2025 7:16 am

raysun wrote: ↑
Tue Jul 22, 2025 11:55 am
The Telegram channel disappeared, so I created a new one:
https://t.me/+pm3GzPdo721mMjFh
Ray: I appreciate that.

Perhaps you should make a separate post so more folks will see it.

Peter in Baja
Peter in Baja

dtich
Forum Guru
Posts: 109
Joined: Mon Jul 17, 2023 2:47 pm
My RE system: 12x Sunpower e20 435; approx 5.2kW; Flexmax100 AFCI; FlexnetDC; Radian 8048; 2x Discover AES 48-6650 (260Ah); Kohler 12RES Gen; completely off-grid, island in NE U.S.

Re: Missing Graph data

Post by dtich » Sat Jul 26, 2025 4:23 pm

Sparkey wrote: ↑
Tue Jul 22, 2025 9:23 am
done and done
You keep using that phrase... I'm not sure it means what you think it means.
princess-bride-you-keep-using-that-word.gif

Post Reply