PSAC knockout panel replacement
Moderators: OutBack Moderator Team, OutBack
-
drstrip
- Forum Guru
- Posts: 191
- Joined: Mon Jan 08, 2007 12:32 pm
- My RE system: 18 x 160W BP3160 modules
2 x VFX3524
2 x MX 60
Mate/Hub/Trimetric
HUP SolarOne batteries SO-6-85-33/23 - 1690AH@24V http://www.hupsolarone.com/
Kohler 15RYG backup - Location: New Mexico - The land of enchantment and 76% of possible sunshine
PSAC knockout panel replacement
The knockouts on the right side of the PSAC are formed in a panel that is screwed to the side of the PSAC. I've replaced my FX3624s and now have large open holes. Where can I find a replacement panel?
-
raysun
- Forum Emperor
- Posts: 9784
- Joined: Tue Jul 26, 2016 5:57 am
- My RE system: Flexpower Two: (2) FXR3048A-01 - Series Stacked, (2) FM80, MATE3s, FlexNetDC
6 SimpliPhi 3.8-48 (48v @ 75AH. 450AH total)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
2 Midnite Solar MNPV6 combiners w/20A DC disconnects.
Honda EU7000is gas fuel generator
Off-Grid
Re: PSAC knockout panel replacement
You may not need to replace the panel if properly sized knockout plugs are installed in the holes: https://stimpson.com/hole-plugs/electri ... kout-plugs
-
drstrip
- Forum Guru
- Posts: 191
- Joined: Mon Jan 08, 2007 12:32 pm
- My RE system: 18 x 160W BP3160 modules
2 x VFX3524
2 x MX 60
Mate/Hub/Trimetric
HUP SolarOne batteries SO-6-85-33/23 - 1690AH@24V http://www.hupsolarone.com/
Kohler 15RYG backup - Location: New Mexico - The land of enchantment and 76% of possible sunshine
Re: PSAC knockout panel replacement
Not sure why I didn't think of that. I've used knockout plugs other places - guess maybe I thought these were non-standard hole sizes. They are slightly oversized for 2" conduit (2.45 vs 2.416), but since Home Depot has the plugs, I'll give it a try next time I'm in town to buy one. Might have to paint them green, though. 