I have a quick question is there a difference between the mate 3 and mate 3s.
My I recently installed a radian 8048 .The supplier gave a mate 3 after installation I found that the mate 3 only gives the flashing cycle light and is not displaying anything so I went to check to see if it would work with my friend's radian which it did not so I have to borrow his to program my 8048 radian
Is this mate 3 defective or is it incompatible with the radians?
Mate 3 or mate 3s
Moderators: OutBack, OutBack Moderator Team
-
raysun
- Forum Emperor
- Posts: 7742
- Joined: Tue Jul 26, 2016 5:57 am
- My RE system: Flexpower Two: (2) FXR3048A-01, (2) FM80, MATE3s, FlexNetDC
6 SimpliPhi 3.8-48 (48v @ 75AH. 450AH total)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
Honda EU7000is gas fuel generator
Re: Mate 3 or mate 3s
Defective.
-
mahendra
- Forum Member
- Posts: 10
- Joined: Wed Feb 16, 2022 6:07 am
- My RE system: Outback Radian 8048, Mate 3, Gs load centre, FM80
Re: Mate 3 or mate 3s
Definitely.
Supplier replaced .
Thanks
Supplier replaced .
Thanks