Charger not turning on when using AGP

A place where users can meetup with other FlexPower One users and can find support for one another. A great place for people who have not purchased the FlexPower One yet to look up information.
Post Reply
Forum Junior Member
Posts: 1
Joined: Mon Apr 24, 2017 12:16 pm
My RE system: fp1

Charger not turning on when using AGP

Post by jzigelhofer »

Having a crazy issue that if I use the AGP to cycle the generator at voltage levels the charger does not turn on. Of course if I go into manual mode the charger works fine. The system had been running fine for months then just went crazy on me. Tried all the usual steps of power cycling the system and even did a bulk charge hoping to get the system solid but nothing. any help would be appreciated.
User avatar
Sandra Herrera
OutBack Management
Posts: 202
Joined: Wed Jul 08, 2015 8:54 am
Location: Arlington, Washington

Re: Charger not turning on when using AGP

Post by Sandra Herrera »

Could you please list the components on your FP1?
Also, when AGS automatically starts the generator, what is the inverter state on the MATE3 screen
Sandra Herrera
Applications Engineering

OutBack Power Technologies
Post Reply