Aux connection issue

Post Reply
Jay007
Forum Junior Member
Posts: 1
Joined: Tue Feb 10, 2026 1:59 pm

Aux connection issue

Post by Jay007 » Fri Jul 24, 2026 5:08 am

Hello. I recently installed a new router and now for some reason the aux port does not work. No traffic flowing through. It shows up in my router device list but nothing doing. The port has flashing orange light. When it first boots the green and orange light up. The Ethernet cable had solid green and am intermittent flashing on the other green light. I've tried hard resets several times. Checked firmware ect. Any ideas. Thank you

raysun
Forum Overlord
Posts: 13646
Joined: Tue Jul 26, 2016 5:57 am
My RE system: (Former system. Now retired.)
Flexpower Two: (2) FXR3048A-01 - Series Stacked, (2) FM80, MATE3s, FlexNetDC
6 SimpliPhi 3.8-48 (48v @ 75AH. 450AH total)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
2 Midnite Solar MNPV6 combiners w/20A DC disconnects.
Honda EU7000is gas fuel generator
Off-Grid

Re: Aux connection issue

Post by raysun » Sat Jul 25, 2026 10:54 am

Get in touch with Outback tech support.

Post Reply