Blew out my flexnet DC and hub. Can I temporarily hook my Outback charge controller to my Mate 3s?
Thanks charles
charge controller directly to Mate 3s
-
solarhills99
- Forum Member
- Posts: 9
- Joined: Sat Jun 11, 2022 1:46 pm
- My RE system: 5000 watts mixed solar panels wired for 48v feeding 500 amp outback agm batteries. Rosie inverter, mate3s, flex net dc, 1 midnight controllers, 1 outback. 3kw base load. Dump loads, phev Rav 4, 2 minisplits.
- Location: Petersburgh, ny
-
raysun
- Forum Overlord
- Posts: 10391
- Joined: Tue Jul 26, 2016 5:57 am
- My RE system: Flexpower Two: (2) FXR3048A-01 - Series Stacked, (2) FM80, MATE3s, FlexNetDC
6 SimpliPhi 3.8-48 (48v @ 75AH. 450AH total)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
2 Midnite Solar MNPV6 combiners w/20A DC disconnects.
Honda EU7000is gas fuel generator
Off-Grid
Re: charge controller directly to Mate 3s
The FlexMax can be connected directly to the Mate using the Outback network port on each device, and a cable used to connect to the Hub.
The FlexMax operates autonomously, however, and doesn't need to be connected to the Mate to function properly.
The FlexMax operates autonomously, however, and doesn't need to be connected to the Mate to function properly.