Download Data from 2 FM80s

Mate3 and Mate3s communications devices for Outback Power
Post Reply
Forum Expert
Posts: 61
Joined: Tue Jun 26, 2018 6:59 am
My RE system: Radian 8048A/GSLC, FlexNet DC, Mate 3s, HUB 10.3, FM80 (2), Hanwha QCELLS 320 (24), Leaf Modules (98), Hyper Engineering Sure Start
Location: Nassau Bahamas

Download Data from 2 FM80s

Post by gpearce52 »

Using the Mate 3s, I am able to download the FM80 data on Port 2 but can find no info on how to download the data from the 2nd FM80 on Port 3.

Any assistance would be greatly appreciated.
Forum Overlord
Posts: 10361
Joined: Tue Jul 26, 2016 5:57 am
My RE system: Flexpower Two: (2) FXR3048A-01 - Series Stacked, (2) FM80, MATE3s, FlexNetDC
6 SimpliPhi 3.8-48 (48v @ 75AH. 450AH total)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
2 Midnite Solar MNPV6 combiners w/20A DC disconnects.
Honda EU7000is gas fuel generator

Re: Download Data from 2 FM80s

Post by raysun »

It's cold comfort, but I can duplicate the log export error. FM80s on Port 8 and 9. When Write Log is selected for FM80:8 its data is written to the Mate3s SD card. When Write Log is selected for FM80:9, FM80:8 data is written to the specified .CSV file.

I was going to try disconnecting FM80:8 and try the Write Log function again (on FM80:9) but the Mate3s now will not read the SDHC card.
Post Reply