Discussion about OutBack Inverters in RV Applications
3 posts • Page 1 of 1
I recently purchased an RV with an Outback MX60 charge controller with a Renogy 3000w 12v-120v... Seems to work great on solar but when plugging in to an AC outlet the Renogy converter system beeps and shuts down. I believe the Renogy needs to go to BYPASS mode. Any ideas? This is my first solar power experience.
- Forum Emperor
- Posts: 1229
- Joined: Wed Jan 22, 2020 9:40 am
- My RE system: GS8048A, FM80 w/3,600W PV Fixed, FM80 w/2,700W on Zomeworks tracker, Mate3, 24 Trojan 2V L16 1100AH @ C20, Grid-Tied with Kohler 14RESA LPG Generator and MEP-803 Diesel if needed.
I install and maintain grid-tied and off-grid systems in my area and consult on solar system design/operation.
- Location: 80 miles NE of Phoenix at 5500'
I doubt that OB is going to give you any support for a Renogy inverter.
I have installed only one Renogy inverter in a camper. My only suggestion is to get a manual and see if there is an error code that is explained in the manual. As I recall, the one I installed was a pretty simple install. Does the issue happen with both small and large loads? If only on larger loads, you may have an issue with the wiring from the battery or the batteries.