AFCI 2.0.1 Firmware

Discussion about the FM100 AFCI Charge Controller
Post Reply
jackjay
Forum Junior Member
Posts: 1
Joined: Mon Apr 05, 2021 12:56 pm
My RE system: Radian 4080A

AFCI 2.0.1 Firmware

Post by jackjay »

Does anyone have the location to download v2.0.1 firmware? I idiotically used v1.2 firmware and now have a bricked controller.
Top
User avatar
Mike Curran
Forum Emperor
Posts: 2771
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one FM80 (2007/2020 - replaced MX60)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied VFXR3524A-01's series stacked, replaced GVFX's (2020)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS. Tigo ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied

Outback Skybox - Barn roof: (2019)
- 14 Talesun 275W in series (DC array input to SB inverter/charger)
- 3 SimpliPhi 3.8 batteries, 48V, 225Ah total
- AC coupled input from 14 Talesun 275W, Enphase M215 microinverters

Battery systems operate in grid-tied, net metering w/backup mode
All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: AFCI 2.0.1 Firmware

Post by Mike Curran »

Looks to me like version 1.2 is the latest, correct version.
Screenshot_20210406-175505_Samsung Internet.jpg
https://ei.tigoenergy.com/p/pZXn7SZQyO45
https://enlighten.enphaseenergy.com/public/systems/Hctc107221
Top
User avatar
BoMagluyan
OutBack Product Management
Posts: 49
Joined: Mon Mar 19, 2018 12:29 pm
My RE system: SkyBox
12x EnergyCell PLR batteries in an IBR3
no PV

Re: AFCI 2.0.1 Firmware

Post by BoMagluyan »

jackjay wrote: ↑Mon Apr 05, 2021 1:08 pm Does anyone have the location to download v2.0.1 firmware? I idiotically used v1.2 firmware and now have a bricked controller.
@jackjay, hopefully you've reached out to OutBack Power Technical Support for help. There is no new firmware for the FM100AFCI product. Installing legacy FM100 firmware, version 1.2, shouldn't be possible, and it also shouldn't brick the controller. It's possible something else occurred at the same time.
Bo Magluyan
OutBack Product Management
OutBack Power Technologies, Inc.
An Enersys Company
1628 W Williams Drive, Phoenix AZ 85027 USA
www.outbackpower.com
Top
Specialist
Forum Junior Member
Posts: 2
Joined: Sat Aug 22, 2020 11:25 pm
My RE system: 1x GS8048A
2x FM80
1x Mate3s
20x qcell 400w
520ah Lithium Battery.
Location: Puerto Rico

Re: AFCI 2.0.1 Firmware

Post by Specialist »

In OpticsRE Supported Firmware List have a versions of firmware not available to download.

https://opticsre.com/Home/#/patch-notes#SF
https://opticsre.com/SupportedFirmware/ ... 07_01.xlsx

Type Model System_Voltage Firmware_Rev
Charge Controller FM100-300VDC 48vDC v001.005.000
Charge Controller FM100-300VDC-AFCI 48vdc v002.001.005

The last week I bought 2 FM100-300VDC-AFCI and they came with 002.000.001.

Where I can download the v2.1.5
Top
User avatar
BoMagluyan
OutBack Product Management
Posts: 49
Joined: Mon Mar 19, 2018 12:29 pm
My RE system: SkyBox
12x EnergyCell PLR batteries in an IBR3
no PV

Re: AFCI 2.0.1 Firmware

Post by BoMagluyan »

Specialist wrote: ↑Tue May 25, 2021 12:03 pm In OpticsRE Supported Firmware List have a versions of firmware not available to download.

https://opticsre.com/Home/#/patch-notes#SF
https://opticsre.com/SupportedFirmware/ ... 07_01.xlsx

Type Model System_Voltage Firmware_Rev
Charge Controller FM100-300VDC 48vDC v001.005.000
Charge Controller FM100-300VDC-AFCI 48vdc v002.001.005

The last week I bought 2 FM100-300VDC-AFCI and they came with 002.000.001.

Where I can download the v2.1.5
There is no new firmware for the FM100AFCI product. v002.000.001 is the only version.

OpticsRE lists all potential past, present, and future versions of firmware that may exist in the multiverse at some time. It does not list all firmware versions that currently exist.

We plan to make a new version of FM100AFCI firmware available for download, in the future, when/if we create one.
Bo Magluyan
OutBack Product Management
OutBack Power Technologies, Inc.
An Enersys Company
1628 W Williams Drive, Phoenix AZ 85027 USA
www.outbackpower.com
Top
Specialist
Forum Junior Member
Posts: 2
Joined: Sat Aug 22, 2020 11:25 pm
My RE system: 1x GS8048A
2x FM80
1x Mate3s
20x qcell 400w
520ah Lithium Battery.
Location: Puerto Rico

Re: AFCI 2.0.1 Firmware

Post by Specialist »

Got it !!

I just prefer the opticsRE in a app for mobile. The portal works like a charm. But isnt friendly use. I prefer login via vpn and use wattplot and matevisual….

My cents.

Thanks for your dev team hard works.
Top
Post Reply

Return to “FLEXmax 100 AFCI”