AXS Port Modbus mapping

Post Reply
Forum Junior Member
Posts: 1
Joined: Fri Nov 06, 2020 9:58 am

AXS Port Modbus mapping

Post by ajsavop »


Very new to Outback and Sunspec. I have an FXR Inverter and AXS Port. Trying to pull data from the AXS Port through Modbus TCP (Micrologix 1400 to be more specific). Looking at the documentation, I dont see where each block references a group of registers(ex: 40001). Am i missing this documentation that will explain where each thing is stored for Modbus?

Thanks in advance,
Forum Emperor
Posts: 5698
Joined: Tue Jul 26, 2016 5:57 am
My RE system: Flexpower Two: (2) FXR3048A-01, (2) FM80, MATE3s, FlexNetDC
SimpliPhi 48-3.8 (6 @ 48v)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
Honda EU7000is gas fuel generator

Re: AXS Port Modbus mapping

Post by raysun »

By documentation, ate you referring to these? ... umentation
Post Reply