GS8048A firmware update failure after Mate3s firmware update

Dual Input, 120/240, stainless steel form factor design for unsurpassed surge capability
Post Reply
fennerjw
Forum Member
Posts: 5
Joined: Sat Mar 21, 2020 9:43 am

GS8048A firmware update failure after Mate3s firmware update

Post by fennerjw »

I was bringing my systems up to the latest firmware and ran into a problem today. I updated my Mate3s to 001.004.004 (1.4.3) without any problem, and then proceeded to update the two GS8048As to the latest 001.006.070 (1.6.70). However, whenever I tried to upgrade the inverters, the system would just hang with no activity on the Hub10.3. Display on the Mate3s showed 0% completion. I left it for several hours with no change. Finally decided to downgrade the Mate3s back to 001.004.003 (1.4.3) and now updating the inverters is working fine.

Just wanted to give a heads up to anyone who might run into the same issue.
Post Reply