FW250 accessories

OutBack's newest innovation in balance-of-system components

Moderators: OutBack Moderator Team, OutBack

Post Reply
Saggy
Forum Member
Posts: 13
Joined: Wed Aug 09, 2017 1:01 pm
My RE system: Trace PS2512 with SWRC, Pulse Energy PC 250 with 60 amp PWM charge controller, Trace T240, 9- Siemens SP 75 panels on DPW pole mounts, 2-L16's and an Onan 2.5lk propane powered generator. Old school stuff.

FW250 accessories

Post by Saggy »

Hi,
New to Outback gear and would like to know if there is a laundry list of components needed to integrate the fw250 enclosures with a fx2524 and a mx60 controller. We would need inverter bypass, generator input on AC side. On DC side, Battery ocpd/disconnect, charge controller ocpd/disconnect, pv ocpd/disconnect, gfp and battery shunt. Am I missing anything?
Thanks
Saggy
Forum Member
Posts: 13
Joined: Wed Aug 09, 2017 1:01 pm
My RE system: Trace PS2512 with SWRC, Pulse Energy PC 250 with 60 amp PWM charge controller, Trace T240, 9- Siemens SP 75 panels on DPW pole mounts, 2-L16's and an Onan 2.5lk propane powered generator. Old school stuff.

Re: FW250 accessories

Post by Saggy »

Looking on Outbacks products page I noticed they do not give a very good description of their pv gfp breaker, is it two slot or one slot wide? Does it act like a molded case switch ahead of a ocpd? In other words how many slots does it need to provide gfp, ocp and disconnect?
Post Reply