Flex Power One AND Mate 3

OutBack's newest innovation in balance-of-system components

Moderators: OutBack Moderator Team, OutBack

Post Reply
User avatar
Forum Guru
Posts: 125
Joined: Thu Mar 22, 2012 9:16 am
My RE system: Off grid house in the southern french Alps 1740m above sea
level. Commissioned 1st Jul 2012.

4 Bosch 245Wp Panels, 12 OPzS 2V 1 220Ah batteries
Management by OutbackPower: FP1-34 including:
FlexMax 80 Charger, GVFX3024E Converter-charger,
FlexNet DC, Hub, Mate3.

Monitoring every 3 hours over Internet (lsdx.eu/GPV_ZSDX)
by 3G managed by a local microcomputer and router.
Location: Serre-Chevalier, France

Flex Power One AND Mate 3

Post by SEYLIONE »

Hello Colleagues,

I am buying a Flex Power 1-34. The doc features only a Mate 1 or 2. What about Mate 3?

Off Grid high (5 700ft) in the French Alps,
1kWp flat on my roof -24┬░ from South, slope 80%
40 kWh C120 batteries
Flex Power 1-34 (FlexMax 60, GVFX3024E converter charger, FlexNet DC)

Thanks for any tip
User avatar
Forum Emperor
Posts: 4334
Joined: Wed Sep 26, 2007 9:59 am
My RE system: 16 Kyocera KC175GT (2,800 watts DC), MX-60, 2 OutBack GVFX3648, 8 GC2 batteries (6v @ 215AH),
Location: Austin, TX

Re: Flex Power One AND Mate 3

Post by tallgirl »

All those parts are supported by the Mate 3.

Remember that with "packages" often the person making the "package" had their own ideas about what was going to be in the "package".
Julie in Texas

I ride bicycles. A lot.
Forum Czar
Posts: 567
Joined: Thu Mar 03, 2005 2:43 pm
Location: Seattle

Re: Flex Power One AND Mate 3

Post by SteveHiggins »

If you want the MATE3 with the FP1 you can order it with it.. Talk to your dealer or distributor.
Steve Higgins
Technical Services Director- Surrette Battery Company

Post Reply