FnDC manuals

OutBack's newest innovation in balance-of-system components

Moderators: OutBack Moderator Team, OutBack

Post Reply
Kent Osterberg
Forum Emperor
Posts: 1523
Joined: Mon Jun 09, 2003 11:01 pm
My RE system: SMA Sunny Boy 2500 with eight Mobil Solar Ra 180 modules
Location: Cove, Oregon
Contact:

FnDC manuals

Post by Kent Osterberg »

I'm expecting three FnDC units to arrive within a few days. I'd like to look at the installation/operation manual before I go out to install them. Any chance the manuals will be online soon?
User avatar
crewzer
Forum Emperor
Posts: 1927
Joined: Mon Sep 27, 2004 10:50 am
Location: Vienna, VA

Post by crewzer »

Kent,

As you probably already know, a software upgrade is rquired for the Mate to work with the new FnDC. Here's an info link: http://www.outbackpower.com/pdfs_genera ... Notice.pdf

HTH,
Jim / crewzer
090805 System Configuration: 966 W STC (849 W CEC PTC) 48V PV array, FM80, 24V x 400 Ah AGM battery bank, FX2524T w/ BTS, Hub-4 & Mate; Link-10 w/ BTS, & E-Panel.
Kent Osterberg
Forum Emperor
Posts: 1523
Joined: Mon Jun 09, 2003 11:01 pm
My RE system: SMA Sunny Boy 2500 with eight Mobil Solar Ra 180 modules
Location: Cove, Oregon
Contact:

Post by Kent Osterberg »

Thanks for the reminder Jim. I've already sent two of the Mates in for firmware upgrades. Need to get the other one taken care of too.
Post Reply