2 MX60s on a PS2DC

Discussion about OutBacks "PS" enclosures

Moderators: OutBack Moderator Team, OutBack

Post Reply
bcmehalic
Forum Member
Posts: 6
Joined: Sun Feb 06, 2005 10:55 am
Location: Prescott, AZ

2 MX60s on a PS2DC

Post by bcmehalic »

Any ideas on the best way to attach a second MX60 to a PS2DC (besides one on the top and one on the side)?
boB

Post by boB »

OutBack has a new dual MX60 bracket set for the side of the PS2DC.

I don't remember what it is called though. You might call one of our highly skilled and knowledgable sales/marketing/applications people.

Thanks,
boB
ericwahl
Forum Guru
Posts: 132
Joined: Wed Mar 13, 2002 11:01 pm
My RE system: (9) SW230mono, XW-60-MPPT, SW5548
Contact:

Re: 2 MX60s on a PS2DC

Post by ericwahl »

bcmehalic wrote:Any ideas on the best way to attach a second MX60 to a PS2DC (besides one on the top and one on the side)?
You can put 2 on the top.
adam

2 MX60s on a PS2DC

Post by adam »

The bracket boB's talking about is the CCB (charge controller bracket). It holds two MX60's. Woo! :wink:
adam
arnold
Forum Guru
Posts: 158
Joined: Sun Jul 07, 2002 11:01 pm
My RE system: Current: 10.9 kW STC (128 BP-585), 4 MX60, 3 GVFX, 4 Concorde PVX-12255
2.46 kW STC (12 KD205GX-LP), Xantrex GT2.8
Previous (still owned): 9.1 kW STC (108 BP-585), 6 SB 3048, 2 SW5048, 8 Concorde PVX-12255

Post by arnold »

I thought the CCB was for the PSDC, not the PS2DC.

arnold
adam

2 MX60s on a PS2DC

Post by adam »

Arnold is right. The CCB is for the PSDC, not the PS2DC. :oops:

You can get a brand new PS2-CCB2 though. It will mount to the PS2 and hold two MX60s. The PS2-CCB2 is $29. 8)

adam
Brian Teitelbaum
Forum Member
Posts: 11
Joined: Sun Dec 22, 2002 11:01 pm
Location: Redway, CA
Contact:

Post by Brian Teitelbaum »

Hey Adam! Could you post a photo of the new bracket? : :D

Brian
AEE Solar
Brian Teitelbaum
Alternative Energy Engineering
Application Engineer
Post Reply