PS1 for 24 volt use?

Discussion about OutBacks "PS" enclosures

Moderators: OutBack Moderator Team, OutBack

Post Reply
billvon
Forum Expert
Posts: 66
Joined: Tue Sep 24, 2002 11:01 pm
Location: san diego

PS1 for 24 volt use?

Post by billvon »

I didn't see a PS1 forum so I thought I would ask here -

I currently have a system with a GTFX2524, an MX60 and a rack of telecom VRLA batteries. The batteries are nearing the 10 year mark, and I'm looking at moving the installation outside in a PS1 enclosure with a smaller battery bank.

-Can you get the PS1 without inverter/charge controller?

-Can it accommodate a 24 volt bank? (I assume this is just one more breaker and/or increased DC wire gauges)
--bill von
User avatar
mvrck
Forum Czar
Posts: 615
Joined: Mon Oct 17, 2005 10:03 am
My RE system: 3.1 kW (BP 60W) on 2x MX60s
560W (Kaneka 60W) on 1 Classic 150
1080W (Day4) on 1 Tristar MPPT 60
GVFX3524 + PS2AC/DC, MATE, HUB4, Charles 24V 30A Charger, Generac S4001, Trimetric 2020, WattPlot, greenMonitor Lite, 400AH Bank (4 ea Rolls Surrette S530 Batteries), and a lot of other solar refuse...
Location: Austin, Texas
Contact:

Post by mvrck »

Send me a private message about this...
Maverick
 
¤ Off-Grid Renewable Energy Specialist
My Outback: 3kW PV STC + MX60s + GVFX3524 + PS2 Combo = Helping Myself to the Sun!
Post Reply