Mate3s failing to properly display inverter usage bar.

Discussion about OutBack Inverters in Off Grid Applications

Moderators: OutBack, OutBack Moderator Team

Post Reply
KnightSolair
Forum Junior Member
Posts: 1
Joined: Fri Jul 23, 2021 9:22 am

Mate3s failing to properly display inverter usage bar.

Post by KnightSolair »

Probably a fairly simple problem and I apologise if there's an answer I have overlooked in the manuals or settings but I was curious as to why this stopped displaying or how to bring it back up. There's no change in performance, and the nbers are displaying correctly, just the bar has ceased to display whatsoever. Picture attached to better show what I mean.
Attachments
Mate3s display.
Mate3s display.
JRHill
Forum Emperor
Posts: 1870
Joined: Thu Feb 17, 2011 11:12 am
My RE system: VFXR3648, FM80, 3k panels, Mate3s, FNDC, 4ea 3.8 PHIs. EU7000is AGS. X240 with big Bertha way off in the shop. Off grid.
Location: PNW
Contact:

Re: Mate3s failing to properly display inverter usage bar.

Post by JRHill »

KnightSolair wrote: Fri Jul 23, 2021 9:29 am Probably a fairly simple problem and I apologise if there's an answer I have overlooked in the manuals or settings but I was curious as to why this stopped displaying or how to bring it back up. There's no change in performance, and the nbers are displaying correctly, just the bar has ceased to display whatsoever. Picture attached to better show what I mean.
First try a known good or new Cat5 cable. Have any of the dielectric grease left to put a dab on the plug at the inverter and hub?
User avatar
Mike Curran
Forum Emperor
Posts: 2478
Joined: Sat Aug 28, 2004 6:28 pm
My RE system: Outback - Garage roof:
- 8 (2x4) Evergreen 180's into one FM80 (2007/2020 - replaced MX60)
- 6 (2×3) ALEO S79-300's into one FM80 (2017)
- 2 grid-tied VFXR3524A-01's series stacked, replaced GVFX's (2020)
- 12 Surrette/Rolls 2V x 1766Ah (2007)
- Hub10.3, Mate3s, FNDC, RTS. Tigo ES maximizers on each PV module.

Westinghouse Solar - Barn roof: (2012)
- 30 (2x15) 235W panels with Enphase M215 microinverters, grid-tied

Outback Skybox - Barn roof: (2019)
- 14 Talesun 275W in series (DC array input to SB inverter/charger)
- 3 SimpliPhi 3.8 batteries, 48V, 225Ah total
- AC coupled input from 14 Talesun 275W, Enphase M215 microinverters

Battery systems operate in grid-tied, battery backup mode
All self-designed and self-installed
Location: Chagrin Falls, Ohio

Re: Mate3s failing to properly display inverter usage bar.

Post by Mike Curran »

Make sure your system information is programmed correctly on your Mate3:
Screenshot_20210726-221731_Adobe Acrobat.jpg
https://smart.tigoenergy.com/p/pZXn7SZQyO45?date=2021-04-19
https://enlighten.enphaseenergy.com/public/systems/Hctc107221
Post Reply