Generator settings after OpticsRE reset.

General Talk

Moderators: OutBack Moderator Team, OutBack

Post Reply
User avatar
Forum Member
Posts: 20
Joined: Fri Oct 09, 2020 8:58 am
My RE system: Off Grid 24V
12kw PV (42 panels total)
Bergey XL1 wind turbine
Flex power 2 System
Kohler 12RES backup generato
Solar One 24v battery bank SO-6-85-27/24 1375ah
Six FlexMax charge controllers.

Generator settings after OpticsRE reset.

Post by jbriant »


I've noticed that when my optics goes off line and requires a manual reset(unplug cable from HUB) my generator
settings get changed. I lose any historical data such as last time gen was run, number of hours etc on the mate3s.
When I hover over the Generator symbol in Optics it shows Last Used 12/31/1969 23:00. My mate3s is at 1.4.6 for firmware.

In addition the tools pulldown menu (top right gear widget on Optics dashboard screen) has the generator set to off and on the mate3s generator control panel the the generator is set to manual.

I posted this in the OpticsRE discussion section as well. Was suggested I call Outback to discuss this issue. Trying post here.
Brian and family somewhere in Vermont
Forum Emperor
Posts: 1531
Joined: Thu Feb 17, 2011 11:12 am
My RE system: VFXR3648, FM80, 3k panels, Mate3s, FNDC, 4ea 3.8 PHIs. EU7000is AGS.
Location: PNW

Re: Generator settings after OpticsRE reset.

Post by JRHill »

There is another recent thread on this:

Post Reply