Interesting developments for A-01 inverters

General Talk

Moderators: OutBack, OutBack Moderator Team

Post Reply
raysun
Forum Emperor
Posts: 5909
Joined: Tue Jul 26, 2016 5:57 am
My RE system: Flexpower Two: (2) FXR3048A-01, (2) FM80, MATE3s, FlexNetDC
SimpliPhi 48-3.8 (6 @ 48v)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
Honda EU7000is gas fuel generator

Interesting developments for A-01 inverters

Post by raysun »

California and Hawaii on-grid residents with the latest smart grid inverters may be in for some interesting opportunities.

https://pv-magazine-usa.com/2021/10/11/ ... beginning/
MJSullivan56
Forum Whiz
Posts: 45
Joined: Fri Aug 13, 2021 4:35 pm

Re: Interesting developments for A-01 inverters

Post by MJSullivan56 »

Which Outback products are currently compatible with this standard?
raysun
Forum Emperor
Posts: 5909
Joined: Tue Jul 26, 2016 5:57 am
My RE system: Flexpower Two: (2) FXR3048A-01, (2) FM80, MATE3s, FlexNetDC
SimpliPhi 48-3.8 (6 @ 48v)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
Honda EU7000is gas fuel generator

Re: Interesting developments for A-01 inverters

Post by raysun »

MJSullivan56 wrote: Wed Oct 13, 2021 10:39 am Which Outback products are currently compatible with this standard?
That's a great question for the Outback Sales department. AFIK, the FXR A-01, and GS A-01 series. No clue about Skybox.
santafedave
Forum Expert
Posts: 60
Joined: Sat Dec 05, 2020 8:05 pm
My RE system: GS8048-A-300AFCI 8 KW 48V Mate3s with 2 FM100 charge controllers pre wired.
21 Canadian Solar 320 Watt PERC MC4 CS3K-320MS panels.
3 Canadian Solar 325W Module Mono Perc 1000VDC panels.
8 FullRiver AGM DC400-6 Sealed Batteries 415AH 6V L16 size.
Fireraptor quick disconnect.

Re: Interesting developments for A-01 inverters

Post by santafedave »

Here is a form that I had to supply PG&E when I was finalizing my NEM-2 agreement with them.
Outback Radian CEC interconnection Status.pdf
(669.72 KiB) Downloaded 10 times
fcwlp
Forum Czar
Posts: 905
Joined: Wed Jan 22, 2020 9:40 am
My RE system: GS8048A, FM80 w/3,600W PV Fixed, FM80 w/2,700W on Zomeworks tracker, Mate3, 24 Trojan 2V L16 1100AH @ C20, Grid-Tied with Kohler 14RESA LPG Generator and MEP-803 Diesel if needed.

I install and maintain grid-tied and off-grid systems in my area and consult on solar system design/operation.
Location: 80 miles NE of Phoenix at 5500'

Re: Interesting developments for A-01 inverters

Post by fcwlp »

So Ray are you going to go grid-interactive? :grin:
raysun
Forum Emperor
Posts: 5909
Joined: Tue Jul 26, 2016 5:57 am
My RE system: Flexpower Two: (2) FXR3048A-01, (2) FM80, MATE3s, FlexNetDC
SimpliPhi 48-3.8 (6 @ 48v)
Outback IBR3 battery enclosure
REC Alpha 440W panels - 2 arrays: each of 4 strings of 2 in series
Honda EU7000is gas fuel generator

Re: Interesting developments for A-01 inverters

Post by raysun »

fcwlp wrote: Thu Oct 14, 2021 7:28 am So Ray are you going to go grid-interactive? :grin:
That's like asking if I'm going to hook the sewer line to my water line. 😂😂

I think I'll pass.

Seriously, it would help the grid down here at the farthest point from generation to have stable, on-demand generation sources. If it paid for the extra battery capacity needed, I'd consider it.
Post Reply