Search found 24 matches

by Applewhite
Thu Oct 20, 2022 2:33 pm
Forum: Off Grid Applications
Topic: FX2024T & LiFePo batteries
Replies: 9
Views: 6211

Re: FX2024T & LiFePo batteries

@ rayson, I spoke too soon!
Victron has a variety of smartshunts and I'm having trouble finding one(s) with an auxiliary relay. Can you provide or suggest specific smartshunt model number(s)
by Applewhite
Thu Oct 20, 2022 12:51 pm
Forum: Off Grid Applications
Topic: FX2024T & LiFePo batteries
Replies: 9
Views: 6211

Re: FX2024T & LiFePo batteries

@ rayson, perfect, thank you! (the OB gear is good at keeping out if trouble - but the engineers maxim still applies: a system can be made fool proof, but it can't be made damn-fool proof.) The maxim at my work is that the best that can be achieved is: "fool proof and idiot resistant" :lol...
by Applewhite
Wed Oct 19, 2022 6:25 pm
Forum: MX60 Charge Controller
Topic: Current thoughts on using mx-60 with lifepo batteries
Replies: 22
Views: 41625

Re: Current thoughts on using mx-60 with lifepo batteries

Thanks in advance @raysun, done!
by Applewhite
Wed Oct 19, 2022 6:24 pm
Forum: Off Grid Applications
Topic: FX2024T & LiFePo batteries
Replies: 9
Views: 6211

FX2024T & LiFePo batteries

So I looked through the threads and could not find a clear answer. Planning to upgrade my ~15 year old system to LiFePo batteries (current candidate batteries are BYD and Ampere Time). Have reached the conclusion that it is wisest to upgrade my trusty MX60 to an FM80 but am hoping I can keep my rock...
by Applewhite
Wed Oct 19, 2022 2:20 pm
Forum: MX60 Charge Controller
Topic: Current thoughts on using mx-60 with lifepo batteries
Replies: 22
Views: 41625

Re: Current thoughts on using mx-60 with lifepo batteries

Wow, that was quick, thanks, I guess FM80 it is! At the risk of a faux pas, can I ask an inverter question in an MX60 forum? I have an FX2024T (rock solid, like the MX60). Currently looking at two different 24V LiFePo battery options; BYD and Ampere Time. You wrote "I've developed necessary com...
by Applewhite
Wed Oct 19, 2022 12:09 pm
Forum: MX60 Charge Controller
Topic: Current thoughts on using mx-60 with lifepo batteries
Replies: 22
Views: 41625

Re: Current thoughts on using mx-60 with lifepo batteries

@ sak54895, did you ever do the installation, have any progress to report? I'm in the same boat (looking to upgrade to LiFePo with my trusty MX60). I've done a fair bit of research and it sort of seems like it is more trouble than it is worth and that it's wiser to upgrade to a lithium battery speci...
by Applewhite
Tue Oct 02, 2007 9:14 pm
Forum: Off Grid Applications
Topic: AUX FX output to run Turbo Kit and Generator Start
Replies: 3
Views: 1949

Maverick, I've got a FX2524T and to my knowledge, I have not yet run it at full load. Just seemed like it was a shame to loose the extra cooling capability "just in case" as a wire up my genny for auto operation. I do have an MX60 and do not use the aux function at this point. Is one optio...
by Applewhite
Tue Oct 02, 2007 4:54 pm
Forum: Off Grid Applications
Topic: AUX FX output to run Turbo Kit and Generator Start
Replies: 3
Views: 1949

AUX FX output to run Turbo Kit and Generator Start

OK, I've read through the similar posts on this topic but am still confused. I understand that you can connect both the muffin fan in the turbo kit and generator start control wires to the AUX output terminals in the FX. I also understand that this means that the fan will run whenever the generator ...
by Applewhite
Tue Nov 07, 2006 10:32 am
Forum: Off Grid Applications
Topic: grounding.... again
Replies: 37
Views: 26030

grounding, grounding, grounding!

Really appreciate the help and hope others benefit from this discussion. A few items: 1) For what it's worth, my installation is not permitted so I echo Phil's comment about code vs. safety/functionality. Right now, safety, functionality, and robustness (ability to withstand lightning, etc.) are pri...
by Applewhite
Mon Nov 06, 2006 2:18 pm
Forum: Off Grid Applications
Topic: grounding.... again
Replies: 37
Views: 26030

grounding, grounding, grounding!

Guys, THANK YOU so much for all your help and inputs. In addition to moving my panels, I am also re-locating and upgrading my electronics (MX60, FX2524T, and 8x 12V-134Ah VRLA batteries). I do not presently have a PSDC, I think I will use the MidNite Solar E-panel in my upgraded installation. I am i...
by Applewhite
Thu Nov 02, 2006 11:40 pm
Forum: Off Grid Applications
Topic: Ideas for an expandable system
Replies: 25
Views: 13189

Tax credit is for Primary home only !?!

It is hard to find good information on exactly what the detailed rules are for the tax credit, but my research including looking at the IRS 2006 Estimated Tax form leads me to believe that the credits are just for your primary home.
by Applewhite
Thu Nov 02, 2006 11:36 pm
Forum: Off Grid Applications
Topic: grounding.... again
Replies: 37
Views: 26030

Grounding... again

Guys, thanks for the inputs Presently have 24V battery and "dinky" 480W array (3x 24V BP160s in series for 72V nom). but intend to add more panels over time, ultimately up to about 2 kW. Am running 2" PVC conduit with pull boxes every 100' so I can add more wire later if necessary. I ...
by Applewhite
Thu Nov 02, 2006 4:30 pm
Forum: Off Grid Applications
Topic: grounding.... again
Replies: 37
Views: 26030

As long as we are on the topic of grounding....

Like others, I have a situation where I'm going to have to mount my PV panels about 250' from the batteries and electronics in order for them to get full sun. Obviously I already have to buy a lot of copper cable to keep my voltage drops under control, do I ALSO have to tie the ground for my PV pane...
by Applewhite
Mon Sep 11, 2006 9:44 pm
Forum: MX60 Charge Controller
Topic: testing panel amperage (will the MX interfere?)
Replies: 12
Views: 6975

As Sparky points out, the MX won't be in the circuit but even if it were... you cannot trust the current values in the MX as anything other than ball park values. To measure the short circuit current of my panels, I used a DVM that has current measuring capability and used test leads with alligator ...
by Applewhite
Mon Sep 11, 2006 9:14 pm
Forum: Off Grid Applications
Topic: Timers are my headache
Replies: 13
Views: 7861

Sparky, have you tried a simple pool pump timer? I have one that ran about $30 and is rated at about 15A. It is outdoor rated and remarkably low power consumption. Easy to prgram too.

just a thought.
by Applewhite
Tue Sep 05, 2006 1:36 pm
Forum: Off Grid Applications
Topic: 72 in, 24 out ??
Replies: 19
Views: 11886

Detailed Efficiency Measurements

Per nsingh's request. I put shunts in both the MX60 input and output lines and made more detailed efficiency measurements. I also disconnected the FX so the results would not be biased by the inverter power draw. I measured the voltage directly across the MX terminals, thereby eliminating other anci...
by Applewhite
Thu Aug 31, 2006 2:14 pm
Forum: Off Grid Applications
Topic: 72 in, 24 out ??
Replies: 19
Views: 11886

MX60 Efficiency

nsingh, I got a 20A shunt and will go ahead and meticulously measure the output power and the input power this weekend and post the results per your request. I am not optomistic that the efficiency numbers will be appreciably better than the dismal 88% I reported earlier. A quick search reveals that...
by Applewhite
Tue Aug 29, 2006 9:11 pm
Forum: Off Grid Applications
Topic: 72 in, 24 out ??
Replies: 19
Views: 11886

nsingh asked how I measured the efficiency. I was actually quite meticulous because I was going to pursure a warranty claim against the PV manufacturer. Before I made a complete fool of myself, I realized that the power that MX displayed was power OUT of the MX, not power IN. I thought the "mis...
by Applewhite
Tue Aug 29, 2006 10:39 am
Forum: Off Grid Applications
Topic: 72 in, 24 out ??
Replies: 19
Views: 11886

72V -> 24V MX60 Power Loss

I use three 24V panels in series (72V nom) that are alternately connected to my MX or my deep well pump. The pump is 560' down, hence the desire for higher voltage panel. Alas, I was unaware that the MX60 runs hot with poor efficiency when using 72V source to charge 24V batteries. Sparky is dead on....
by Applewhite
Mon May 22, 2006 1:42 pm
Forum: Off Grid Applications
Topic: 24 volt VS 48 volt systems
Replies: 5
Views: 8812

On the topic of Firdges and Freezers..

Check out the ENERGY STAR web site for a thorough and comprehnsive listing of all the most efficient appliances you can get: http://www.energystar.gov/index.cfm?c=refrig.pr_refrigerators You can buy a "normal" size refrigerator from your neighborhood appliance store (you may have to specia...
by Applewhite
Thu Apr 20, 2006 11:43 am
Forum: Off Grid Applications
Topic: Anybody Using an RV Generator?
Replies: 12
Views: 10899

Anybody Using an RV Generator?

I'm looking for a small propane powered generator for my cabin in the mountains. When I look at all the options, it seems like RV generators have alot of good qualities; low noise, vermin proof enclosure, designed for a lot of continuous use, and seem to be a LOT more economical. I have been warned ...
by Applewhite
Thu Mar 30, 2006 11:45 am
Forum: MX60 Charge Controller
Topic: Can a MX60 pv feed be paralleled with a direct pv water pump
Replies: 8
Views: 8471

Manual Transfer Switch

Nothing sounds more simple than a manual transfer switch! You can get a 30A switch that is no bigger than a light switch, that ought to be easy enough to package in a weatherproof enclosure. There are even toggle switches that are rated at 30A. A good source is http://www.newark.com. Take a look at ...
by Applewhite
Wed Feb 22, 2006 6:01 pm
Forum: Mate Serial Communications
Topic: ? Amp Hour meter with remote ability
Replies: 7
Views: 9236

Status of Smart Shunt?

Scott, is it possible to get a status on the Smart Shunt? Any chance it will hit the market in 2006? Second quater 2006? Soon?
Thanks!
-Anthony-
by Applewhite
Thu Jan 19, 2006 5:56 pm
Forum: MX60 Charge Controller
Topic: Can a MX60 pv feed be paralleled with a direct pv water pump
Replies: 8
Views: 8471

I never considered paralling my pump with the MX60 - interested to find out how it works. Simple is Good! For my small cabin system I put in a relay that will switch the panels between the pump and the MX60 based on any of the following; 1) the tank float switch, 2) manual override, and 3) programma...