Search found 3600 matches
- Sat Oct 10, 2026 6:25 pm
- Forum: FLEXmax Charge Controllers
- Topic: FM100 Loses Settings / History When Power Cycled
- Replies: 22
- Views: 11053
Re: FM100 Loses Settings / History When Power Cycled
I found this thread interesting because I have a spare Skybox, sitting unpowered, that also has a BR2032 battery to maintain user settings (I'm assuming). What I'm getting from this is not to worry if the battery dies. If and when I have to install the spare, whether the battery dies or not, I still...
- Fri Oct 02, 2026 1:40 pm
- Forum: OpticsRE
- Topic: Graph colors
- Replies: 13
- Views: 1737
Re: Graph colors
If the voltage line is supposed to be green when it's above the low warning point, why is mine orange (or is that yellow?)?
- Wed Sep 30, 2026 5:45 am
- Forum: SkyBox Inverter
- Topic: Skybox for sale
- Replies: 1
- Views: 1539
Re: Skybox for sale
Check your PMs
- Thu Sep 24, 2026 8:56 am
- Forum: OpticsRE
- Topic: Graph colors
- Replies: 13
- Views: 1737
Re: Graph colors
Well, I may be mis-remembering. But I do seem to recall looking at other users' screenshots (on the forum) of their Optics graphs where the colors displayed for various variables didn't match mine. No big deal. Thanks.
- Sun Sep 20, 2026 4:42 pm
- Forum: OpticsRE
- Topic: Graph colors
- Replies: 13
- Views: 1737
Graph colors
Can someone remind me how to change the color(s) of the variables displayed on Optics' graphs? I know I ran across the place to do it years ago but cannot find it now.
Thanks.
Thanks.
- Sun Sep 13, 2026 8:43 am
- Forum: OpticsRE
- Topic: Mate3s local web server / Modbus keeps crashing/going offline after OpticsRE server migration
- Replies: 15
- Views: 2940
Re: Mate3s local web server / Modbus keeps crashing/going offline after OpticsRE server migration
I know Andrew did a lot of work to address the polling contention, but early on it seemed like one could run Optics or one could run Wattplot but not both concurrently. I didn't know it was even possible to run Optics and Wattplot at the same time. Don't both Optics and Wattplot require connection ...
- Sun Sep 13, 2026 8:35 am
- Forum: OpticsRE
- Topic: next issue: Optics alerts
- Replies: 9
- Views: 453
Re: next issue: Optics alerts
Ok, glad it is not just me... and since I no longer get notifications about notifications to replies to postings here, it might be a general issue with their email system. I still get those notifications for responses to threads I've commented on. Most recent was yesterday 9/12/26 for the thread &q...
- Wed Sep 09, 2026 7:49 am
- Forum: OpticsRE
- Topic: Battery icon detail - power flow diagram
- Replies: 1
- Views: 162
Battery icon detail - power flow diagram
When I click on the battery icon in the Optics power flow diagram, it indicates there are 2 FM's charging it (see screenshot). I just recently restored one of my roof arrays but I've deleted the other - the second FM80 no longer appears in the equipment list. So why does it appear at the battery, an...
- Wed Sep 02, 2026 2:12 pm
- Forum: OutBack
- Topic: California NEM 3.0 web seminar
- Replies: 1
- Views: 190
California NEM 3.0 web seminar
For those interested in the direction California (and maybe the rest of us grid-tied folks) are going with net metering, this ASES webinar may be of interest: https://ases-org.zoom.us/meeting/register/9g27KEbiS1uvpLaKDQL9Fw Screenshot_20260902_165032_Gmail.jpg You needn't be an ASES member to regist...
- Wed Sep 02, 2026 9:39 am
- Forum: Third-Party Batteries
- Topic: Rolls surrette r24 150 lithium
- Replies: 14
- Views: 25829
Re: Rolls surrette r24 150 lithium
Agree 100%. Steve goes way back on the forum and I, too, have benefited from his advice.ralphday224 wrote: ↑Sun May 24, 2026 3:55 amAdvice from the absolute best source in my opinion. He's helped me greatly over the years with my Surrette batteries (FLA's)
- Thu Jun 25, 2026 4:18 pm
- Forum: Grid Tie Applications
- Topic: Max Solar Harvest for Selling
- Replies: 22
- Views: 13529
Re: Max Solar Harvest for Selling
Also note my system consistently sells because with OB FM80 charge controllers, enabling grid-tie mode "automatically raises the charge controller’s Float voltage to equal its Absorption voltage. Since the inverter sells power to maintain its own Float, Absorption, or other settings (all normal...
- Thu Jun 25, 2026 1:23 pm
- Forum: Grid Tie Applications
- Topic: Max Solar Harvest for Selling
- Replies: 22
- Views: 13529
Re: Max Solar Harvest for Selling
If your battery gets an absorb charge first thing in the morning and your sell voltage is at your battery's specified float setting, then your battery should not lose charge as a result. Once selling stops due to sunset or whatever, the grid should pick up your loads and prevent battery discharge*. ...
- Wed Jun 24, 2026 5:39 pm
- Forum: Grid Tie Applications
- Topic: Max Solar Harvest for Selling
- Replies: 22
- Views: 13529
Re: Max Solar Harvest for Selling
@SDman: When your system appears stuck in float, it could be because sell is set too high. With sell at 54 and float at 53.6, your system is perfectly happy to sit at float rather than sell. Try setting your sell voltage where you want your batteries to float, and set float voltage slightly above th...
- Tue Jun 23, 2026 5:31 pm
- Forum: OpticsRE
- Topic: data dropouts
- Replies: 190
- Views: 57064
- Sun Jun 21, 2026 10:19 am
- Forum: OutBack
- Topic: An observation
- Replies: 12
- Views: 11821
- Fri Jun 19, 2026 5:53 pm
- Forum: Grid Tie Applications
- Topic: What to expect from Pass Through Mode on inverter?
- Replies: 11
- Views: 7540
Re: What to expect from Pass Through Mode on inverter?
When I do a search of the 8048 operator manual, two occurences of "pass through" are found. One under the backup operating function, and one under "transfer", which I think is a general topic describing how the inverter transfers from an outside source for your loads, to invertin...
- Mon Jun 08, 2026 12:53 pm
- Forum: Photos of My OutBack Power System
- Topic: 1.8kw array restoration
- Replies: 0
- Views: 9474
1.8kw array restoration
On garage roof, removed last summer for roof replacement. Will be the original 2P3S 300W panels.
Alas, the other 1.44kw array, 2P4S 180W panels, won't be going back. I'm in a little bit of a recess now while my new left hip heals.
Alas, the other 1.44kw array, 2P4S 180W panels, won't be going back. I'm in a little bit of a recess now while my new left hip heals.
- Mon Jun 08, 2026 12:42 pm
- Forum: Off Grid Applications
- Topic: Bubba
- Replies: 5
- Views: 7109
Re: Bubba
Got the album
- Sun May 31, 2026 4:47 pm
- Forum: OutBack
- Topic: Negative conductors on 2×3 array
- Replies: 2
- Views: 6047
Re: Negative conductors on 2×3 array
What I thought. Thanks
- Sun May 31, 2026 3:03 pm
- Forum: OutBack
- Topic: Negative conductors on 2×3 array
- Replies: 2
- Views: 6047
Negative conductors on 2×3 array
I'm reconnecting the conductors for one of my arrays that was removed for roof replacement last summer. The array has 2 strings of 3 panels in series, and all the conductors (2 positives, 2 negatives) run down into the DC panel in the garage, where the "combiner" is integral to the rest of...
- Sun May 24, 2026 5:22 am
- Forum: SkyBox Inverter
- Topic: Need SkyBox Firmware File 1.5.30 or later
- Replies: 14
- Views: 14953
Re: Need SkyBox Firmware File 1.5.30 or later
That message you're getting "Irreparable file corruption detected. Enabling SSH access for remote recovery" sounds like ET phone home - somebody at the former Outback would (probably) have to connect to your Skybox to fix the file. Not good news. If you can run on one Skybox then maybe a t...
- Sat May 23, 2026 2:43 pm
- Forum: Grid Tie Applications
- Topic: GT mode doesnt send power to house
- Replies: 4
- Views: 10115
Re: GT mode doesnt send power to house
So IIUC you have the inverter bypassed to get grid supply to your house, right? And with grid connection to inverter, nothing flows thru it to house? Meanwhile your battery gets charged via solar - fyi, that's not a Radian function, your FM80 charge controller is doing that. I'm no Radian expert but...
- Sat May 23, 2026 2:27 pm
- Forum: SkyBox Inverter
- Topic: Need SkyBox Firmware File 1.5.30 or later
- Replies: 14
- Views: 14953
Re: Need SkyBox Firmware File 1.5.30 or later
Note, behind the control board on the "board" underneath (IIRC) there's a BR2032 coin cell that maintains Skybox memory of some sort. If your Skybox has been energized most of the time the cell shouldn't have depleted much, but if it somehow fell your master may have crashed because of tha...
- Sat May 23, 2026 11:19 am
- Forum: SkyBox Inverter
- Topic: Need SkyBox Firmware File 1.5.30 or later
- Replies: 14
- Views: 14953
Re: Need SkyBox Firmware File 1.5.30 or later
Sasha - I have a copy of 1.5.30 but if your slave Skybox is running 1.5.33 I don't think you can put 1.5.30 on the Master and expect them to work together. Also, I have heard that it's not advisable to try to go back to a previous version of firmware. If you want to try it anyway, PM me with your em...
Re: Gaps
My Skybox system appears normal. VFXR system has no solar (panels removed, batteries used for backup thru VFXRs) and looks like yours.