Search found 536 matches
- Mon Nov 02, 2026 4:55 pm
- Forum: Grid Tie Applications
- Topic: Grid-Tie settings during extended grid-down situation?
- Replies: 6
- Views: 175
Re: Grid-Tie settings during extended grid-down situation?
I have two 8048s and am gridtied. My impression is Outback is better for off grid than on grid, so equipment would last longer. My big concerns with extended off grid are: 1) automatic shutoff with low batteries. Not sure this exists. 2) getting used to extended cutbacks on electricity to prevent lo...
- Wed Oct 21, 2026 8:47 am
- Forum: OpticsRE
- Topic: HBX Questions
- Replies: 2
- Views: 96
Re: HBX Questions
Thanks. My real mention is to use SOC as a discharge threshold, then at certain voltage sell to the grid, and finish charging with voltage as a charge threshold. Does not seem possible with Outback. In a few years when I reach 10 years connected, I may not receive any money for sell back, so at that...
- Tue Oct 20, 2026 4:44 pm
- Forum: OpticsRE
- Topic: HBX Questions
- Replies: 2
- Views: 96
HBX Questions
I have a couple questions about HBX: 1) Plz confirm sell back is disabled? Appears so from what I’m reading. 6.5 cents per kWh is not a lot, but something. 2) plz confirm can’t disable voltage or soc limits? I want to discharge to SOC and charge to voltage. The only way around this is on discharge t...
- Sun Oct 18, 2026 2:53 am
- Forum: RADIAN Series
- Topic: Mini Grid not connecting automatically (solved?)
- Replies: 14
- Views: 1223
Re: Mini Grid not connecting automatically
FWIW, I have also not gotten mini grid to exit automatically. First was a single radian, and then I am now a dual radian.
- Wed Oct 07, 2026 3:35 pm
- Forum: Off Grid Applications
- Topic: Could I connect an air conditioner to my off-grid system?
- Replies: 19
- Views: 5242
Re: Could I connect an air conditioner to my off-grid system?
double post deleted
- Wed Oct 07, 2026 3:34 pm
- Forum: Off Grid Applications
- Topic: Could I connect an air conditioner to my off-grid system?
- Replies: 19
- Views: 5242
Re: Could I connect an air conditioner to my off-grid system?
I post this because true data on AC kWh usage is about as rare as a unicorn. I also hope a mere 5 kWh per day brings you cooling you want. The orange bar comes from the grid; the green bar from 1.4 kW of solar panels. This is my 2025 energy draw where the only load is an air conditioner. It is a sin...
- Tue Sep 29, 2026 1:14 pm
- Forum: OpticsRE
- Topic: I am a hack
- Replies: 7
- Views: 1272
Re: I am a hack
That remote camera crossed my mind today. I have an extra camera I could add. 350 days a year, my system works good, not perfect, good in AZ. The 15 days it doesn’t work good it’s rainy and I need to manually change things. Today was one of those rainy days where batteries needed more power, so I ne...
- Fri Sep 11, 2026 6:07 pm
- Forum: FLEXmax 100 AFCI
- Topic: Suggestions for New Array with (2) FM100s
- Replies: 7
- Views: 681
Re: Suggestions for New Array with (2) FM100s
Record cold in your area will drive how many in series. 5 x 400 watt panels use my area in super hot phoenix.
Six would exceed or be more nvomfirtanly close to the record cold limits with VOC.
My first array with 10 kW with 2 x FM 100s 4s3p to each controller.
Six would exceed or be more nvomfirtanly close to the record cold limits with VOC.
My first array with 10 kW with 2 x FM 100s 4s3p to each controller.
- Thu Sep 10, 2026 3:12 pm
- Forum: FLEXmax 100 AFCI
- Topic: FM100 Fan replacement
- Replies: 2
- Views: 12975
Re: FM100 Fan replacement
I just got a replacement FM100 AFCI fan, spare 46 delivered to me from US Solar supplier for a total of $132 including shipping, As linked by @kimr.
I am happy to still be able to purchase spare parts
I am happy to still be able to purchase spare parts
- Wed Sep 09, 2026 12:27 pm
- Forum: Off Grid Applications
- Topic: Honda EU7000iS Settings for Backup Charging
- Replies: 18
- Views: 592
Re: Honda EU7000iS Settings for Backup Charging
Not a generator user, but this is what I notice: -you have a generator ac input limit of 14 amps, and a charger limit of 30 amps. The generator needs to power both the charger and the loads. Outback does not taper the charger when loads + charger exceed 14 amps. My loads are up to 11 kW and to charg...
- Tue Sep 08, 2026 5:14 am
- Forum: OutBack
- Topic: Outback installer near Portland, Oregon
- Replies: 13
- Views: 956
Re: Outback installer near Portland, Oregon
You may try contacting outback support directly. On their outback power website, there’s a support chat. That may work. From a different company for a different project, I got a list of 5-8 installers, most of which would not do the work and one that ghosted me while doing an estimate. If you can’t ...
- Fri Sep 04, 2026 5:48 pm
- Forum: Off Grid Applications
- Topic: How do I wire 2 charge controllers to one battery bank?
- Replies: 7
- Views: 530
Re: How do I wire 2 charge controllers to one battery bank?
In your profile, I see you have a single 2524 and are asking about desulfating batteries which makes me wonder if max charge would be exceeded with a second charge controllers. On a non-Outback system, my lead acid batteries were very limited on how much I could charge, 10% of C20. With two charge c...
- Sat Aug 15, 2026 4:39 am
- Forum: Third-Party Batteries
- Topic: looking for battery recommendations
- Replies: 17
- Views: 1404
Re: looking for battery recommendations
With lithium batteries, they can be added to later, but I have found your original equipment might not be available. With my fortress power eFlex 5.1 kWh batteries, those are being phased out and being replaced by the eFlex max which despite looking almost the same, are not compatible with each othe...
- Thu Aug 13, 2026 5:41 pm
- Forum: Third-Party Batteries
- Topic: looking for battery recommendations
- Replies: 17
- Views: 1404
Re: looking for battery recommendations
If you can find an alternative installer or local shop that can provide support, to me that’s more important than the brand. I’d recommend Fortress power lithium if they can stay warm. If in Maine in unheated area, keep in mind charging lithium below freezing can ruin the batteries. If this is a fac...
- Sun Aug 09, 2026 9:31 pm
- Forum: OpticsRE
- Topic: Is OpticsRE working again?
- Replies: 56
- Views: 3221
Re: Is OpticsRE working again?
I do not notice any improvement. Significant gaps still.
- Sun Aug 09, 2026 4:52 am
- Forum: Grid Tie Applications
- Topic: HBX problems
- Replies: 7
- Views: 1191
Re: HBX problems
I spent some time looking on swapping these small relays and did not find much on procedures and part numbers.
- Mon Aug 03, 2026 4:08 am
- Forum: Off Grid Applications
- Topic: SOC and Voltage disagree wildly
- Replies: 9
- Views: 1347
Re: SOC and Voltage disagree wildly
What are your settings for the flex net DC?
I would not say these are good, but I pictured mine below. The first setting of 800 amp hours is missing.
I have always had problems like yours. I use fortress power eflex batteries.
I would not say these are good, but I pictured mine below. The first setting of 800 amp hours is missing.
I have always had problems like yours. I use fortress power eflex batteries.
- Thu Jul 30, 2026 2:44 am
- Forum: Grid Tie Applications
- Topic: HBX problems
- Replies: 7
- Views: 1191
Re: HBX problems
Was this system been in use and working with the gel batteries with HBX? I have no useful suggestions except purchase enough UPS to cover the switch on important devices and I am sure you thought of that. I don’t use HBX mode but any auto cutout or cut in modes I have used don’t work on my dual radi...
- Wed Jul 29, 2026 7:58 pm
- Forum: OutBack
- Topic: Adding more batteries
- Replies: 5
- Views: 1104
Re: Adding more batteries
Wait to the end of life. The voltage charge is different. Absorb on lead is too much for lithium and going down to lithium voltage levels never fully charges lead. You’ll find outliers that swear by this. I also think if I can afford something years down the road versus now. Generally, I can afford ...
- Wed Jul 29, 2026 12:36 pm
- Forum: OpticsRE
- Topic: Help to graph CSV logfiles data as shown in OpticsRe
- Replies: 1
- Views: 714
- Fri Jul 03, 2026 6:28 pm
- Forum: OpticsRE
- Topic: Ecoworthy to Optics
- Replies: 16
- Views: 11000
Re: Ecoworthy to Optics
I have fortress batteries.Specialist wrote: ↑Mon Jun 29, 2026 9:03 pm
I Already test Pytes, fortress, Local Battery manufactured in Puerto Rico
Are you saying you tested those in closed loop with the Outback inverter successfully?
- Fri Jul 03, 2026 5:49 pm
- Forum: Off Grid Applications
- Topic: Old system looking to switch to LFP batteries
- Replies: 34
- Views: 22288
Re: Old system looking to switch to LFP batteries
“ Any input welcomw. I know it's Friday night before your 4th of July thing. Don't even expect anyone to see this before Monday... but I plan to do this tomorrow. Here's to not frying me or any equipment!” These diagrams are good and should give you the detail you are looking for https://outbackpowe...
- Mon Jun 29, 2026 12:11 pm
- Forum: Grid Tie Applications
- Topic: Gvfx voltage calibration?
- Replies: 3
- Views: 8879
Re: Gvfx voltage calibration?
“ Another probably very basic question, if I have charger turned off on gvfx, do absorb and float settings even matter?” In my Radian, no voltages don’t matter. In case inverter charge was ever turned on, I do set absorb to a little less than the charge controllers, rebulk lower also so I do not sta...
- Sun Jun 28, 2026 6:30 pm
- Forum: RADIAN Series
- Topic: Disable sleep in stacking.?
- Replies: 3
- Views: 8317
Re: Disable sleep in stacking.?
I have no suggestions other than what you suggested. My dual 8048 has inverter #1 set to priority of 4, and inverter #2 set to priority of 1. This was done by the installer so that loads would be shared, but you are right, it never shuts inverter 2 off. Are there any known issues? I can see a parasi...
- Sun Jun 28, 2026 6:21 pm
- Forum: Grid Tie Applications
- Topic: Max Solar Harvest for Selling
- Replies: 22
- Views: 13519
Re: Max Solar Harvest for Selling
What’s worked for me is saving the local webpage as a pdf, blanking out the MAC address, and posting that.
I will work through n getting that posted for me.
I will work through n getting that posted for me.